Name: davidcarter
Country: USA
EMail: lavajava12@aol.com
Comments
COOL FUCKIN SITE
Name: davi
Country:
EMail:
Comments
Name: davidcarter
Country: usa
EMail: lavajava12@aol.com
Comments
spudlauncher.com
gotspud.com
both good sites
my farthest launch in the air it did not come back for a minite and a half
holy shiet
Name: santino
Country: usa
EMail: macdaddytino69@hotmail.com
Comments
Name: rojerramjet@hotmail.com
Country: Australia
EMail: rojerramjet@hotmail.com
Comments
great stuff......
Name: big rob
Country: great britain
EMail:
Comments
this site is cool
Name: Jay
Country: america
EMail: jayhollaatme06@hotmail.com
Comments
Name: Ben Herrman
Country: USA
EMail: Zorg127@aol.com
Comments
Name: MASTER BLASTER
Country: USA
EMail:
Comments
AIR IS THE ONLY WAY TO FLY!!!!!NEVER MIND THE PLASTIC TOYS.....GET HIGH TECH.....1200 FT TENNISBALLS.1 MILE + GOLF BALLS......POTATOES,WELL THEY BETTER BE GREEN..LOL..THE POWER OF AIR WILL GET YOU HIGH!!!!!AND FAR ;-)
Name: GERK;)
Country: usa
EMail: hockey009900
Comments
ur cool
Name: PAUL
Country: U.S
EMail: pjo80@yahoo.com
Comments
on your gun to keep the ammo from going into the combustion chamber you should stick a pin or screw right in between
Name: adam z
Country: usa
EMail: i_skate_shortys@hotmail.com
Comments
this site is so cool
Name: Guayalipo Huaro
Country: Lithuania
EMail: Cukkakli@jajano.net
Comments
Mikka, Ni poshto muert noisinu hanna lussan. Kikkanuga bop.
Name: kevin allen
Country:
EMail:
Comments
Name: Donnie
Country: USA
EMail: None
Comments
Cool site
Name: badvoodoo
Country: québec canada
EMail: harrypoteux@hotmail.com
Comments
hi i really appreciated your site ...i would not say it's the best but it gives things that looks interresting..i would relly like and i'm sure not the only one that you put some plans (draw) because some people like me are not very good in english and would prefere drawings ...i build a spud gun 3 months ago it as a chamber of 2.5'/4" with a barrel of 4'/2" it works really great it's all made of abs also i suggest you to put loads of propellants on your site ..thing to shoot at ..things to shoot with and places to shoot at ...your site already kicks ass because it's canadian but would kill if it was more filled
Name: brandon
Country: usa
EMail: brandon
Comments
i have a spud gun that uses a sparker and some times the spark will just hit the side of the pvc and it will not fire can any 1 tell me how 2 fix it?
Name: brandon
Country: u
EMail:
Comments
Name: Brandon
Country: usa
EMail: brandonhollaway
Comments
COOL GUNS!
Name: Dimbit
Country: UK
EMail:
Comments
We often have trouble getting our spud cannon to fire. Try using less propellant. About 1/2 to 1 second of hairspray. Less is more, trust me. Too much and you'll blow all the air out of the chamber so there's nothing to burn.
Name: ian whiting
Country: australia
EMail: iwizza@hotmail.com
Comments
i have made several gun but this last will not fire
Name: Russ May
Country: U.S.
EMail: sa22lr@yahoo.com
Comments
hey,
jusy built a basic combustion spudzooka tonight@ (04/12/03) named it "tato' annihilation" ....first fired one of these babies in 1993....finally got around to constructing my own....tomorrow! we lay siege to the woods surrounding the Oconee River!
Name: Allan
Country: USA
EMail: pyrofire@charter.net
Comments
cool spud guns planin to make my own combustion cannon I already built a air cannon
Name: zach
Country:
EMail: skatelad1@skateboard.com
Comments
can you send me info on how spud cuns got started?
Name: Scott
Country: USA
EMail: scottyg05@hotmail.com
Comments
Great site, i look foward to trying out the toilet paper launcher and the silencer but i cant thread the barrel and attachments right, any tips and or tool suggestions?
Name: Fred
Country: Canada
EMail: N/A
Comments
Thanks for the plans.
PS, New design looks great.
Name: John Shortreed
Country: Canada
EMail: j-shortreed@hotmail.com
Comments
Thanks for visiting
